Complete Step-by-step Guide for Installing a New Shower Unit

Call Today

The article author is making a number of great pointers on How to Install a Direct-to-Stud Shower Enclosure overall in this great article just below.

An effective shower installation requires careful planning and a lot of job. For the most part, you will require to do three sorts of tasks: mounting walls, mounting the plumbing, and also completing wall surfaces.

Different Kinds Of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be attached to the bathroom faucet according to your requirement, and also the water temperature can be adjusted via the taps. Push-on mixers are cheap as well as very straightforward to mount. Nonetheless, although the tube link is basic, it is quickly displaced. In addition, it is troublesome to change the temperature.

Bath/Shower Mixer: The hose and also spray of this type of shower are combined with a bathroom mixer tap, and the temperature level can be changed through the bathroom taps. It is a really economical option and also no additional plumbing is entailed. Nonetheless, the bath/shower mixers likewise suffer from bothersome temperature control alternatives.

Manual Mixer: The hose pipe as well as spray of a hand-operated mixer shower system belong of the wall surface device and the cold and hot water supplies are attached to a solitary valve The temperature and stress of the water are managed with either one or a selection of knobs (in extra expensive showers). Although temperature control is a lot easier in hand-operated mixer types, they are extra costly than the formerly stated mixers. They additionally call for additional plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall surface unit and also the hot and cold water supplies are attached to a single valve right here too. It is full with a built-in stabiliser to self-adjust the water temperature level and also to avoid it from becoming as well warm. One of the largest advantages of a thermostatic mixer shower type includes practical temperature level control. Nonetheless, it is the most expensive of the different mixer choices.

Power Shower: A power shower is a single unit including an effective electrical pump that can modifying both the water stress and also temperature level. This kind of shower can be fitted if there is water system from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both pressure and also temperature level simple. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a mix boiler under keys pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats the water electrically. It is essential to note that for this shower type to be mounted, the mains stress needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature level as well as pressure to be changed through a knob. Versions with temperature stabilisers are much better as they remain untouched by various other faucets somewhere else being used within the family. A major downside of electric showers is that the control handle only permits the choice of heats at less stress, or lower temperature levels at a greater stress. This is problematic in the winter when the spray is commonly weak and also the mains water is cooler. However, this issue is taken on in some versions which are available with a winter/summer setup.

The Majority Of Common Errors

Breaking or neglecting neighborhood code restrictions.

Using pipes that are too little.

Connecting copper to galvanized without utilizing a brass or dielectric suitable between the two.

Not making use of tape or pipeline substance at threaded joints.

Uneven your components when installing them.

Not setting up an air gap filling for fixtures.

Reducing supply stub outs as well short to install the shutoff valves onto after the completed wall is in place.

Not correctly aligning tubing into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will cause a leakage.).

When turning the water back on in your home, constantly run the outside pipe valve or purge your bathrooms to bleed dust and also air from the lines. This debris can create issues in your sink taps and various other plumbing trim.

Preparation.

First of all, you must choose the kind of shower that you desire to mount. It is necessary to identify whether the selected shower can managing specific systems and also can control a safe degree of water through the boiler. The majority of shower units nowadays are made to be versatile to various water pressures (such as kept warm water and chilly keys).
It is likewise vital to take into consideration the water stress and also the planning of the piping and also drain for the shower.

Method.

Depending on the sort of shower you want to mount, the shower head must either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it has to have a check valve.
Before starting, it is suggested to mark the settings of the shower head and also control, and to intend the pipe-work included. Additionally, the water drainage system to remove the drainage will certainly need to be intended. Both positions of the wire route as well as the shower button will likewise require to be considered if an immediate or electric shower device is being mounted.
Use the direction guide given with the shower device to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is very important to remove the water supply. In order to protect the pipes, they should be given a waterproof covering as well as also fitted with separating shutoffs. The pipes can then be hidden right into the wall and glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Connect the major shower control to the pipelines that will certainly be supplying the water (This might need a female screw string adapter).
Reconnect the water system and examination the pipes for any kind of leaks, as some may require tightening up.
If you are installing an electric shower, remember to turn off the electrical power supply prior to making any type of electric connections. When these connections have been made (there ought to be guidance within the instruction manual), the power supply can be switched back on.

Changing Water Stress to Match Your Shower.

The cold water storage tank can be raised to a higher height (in some cases as little as 150mm (6inches)) by fitting a solid wooden support under it - perhaps made up of struts and blockboards. If you choose this choice, the primary as well as distribution pipes will also have to be raised to meet the new elevation of the storage tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it has to be linked into the power supply in order to operate.

Piping and also Drain.

It is best to utilize 15mm diameter supply pipelines, as well as make the runs to the shower as short and straight as feasible so as to maintain optimal pressure as well as minimise warmth loss. Furthermore, by reducing the use of arm joints for pipe edges, you can decrease the resistance in the flow of the water supply. You can attain this by bending the pipes rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

We were made aware of that article about How to Install a One-Piece Shower Unit through a friend on our other blog. Sharing is nice. You never know, you may be helping someone out. Thanks for your time spent reading it.

Pricing